FIREBALL TOOL BENCH VISE
What’s special about this bench vise:
This vise has a specially designed 4 point swivel base designed to match up with holes on most common welding tables. Whether you have a table with 5/8″ or 16 mm holes, if the spacing is on 50 mm centers this vise will fit. You can quickly bolt and unbolt the vise anywhere on the table as needed. When mounted in the correct orientation, the back jaw will hang over the edge of the table, allowing you to clamp tall objects in the vise.
Other Great Features:
This vise is made from forged steel rather than cast iron, which has a higher yield strength for a comparable size. The 90,000 PSI tensile strength of these forgings allow the vise to be lightweight but with a comparable strength to vises with twice the weight. Since it’s welded together, if you ever take things a little too far with a cheater bar you can repair it relatively easily.
- 90,000 PSI tensile strength forged steel
- Black Oxide finish on the jaws and other hardware
- Replaceable flat jaws and pipe jaws
- Adjustable, machined guide rail ensures smooth action
- 360 Degree Swiveling Base
- 4 Mounting Holes with 100 x 150 mm center for mounting on welding tables. Holes are 16 mm in diameter.
- Large machined anvil surface on the rear.
- Hammer tone blue powder coat
- Made in Taiwan
Ball Lock Bolts (Set of 4)
All Ball Lock Bolts are a time-saving and efficient method of locating and fastening fixture elements to the tabletop without having to reach underneath the table.
Insert the Ball Lock Bolt over the fixturing element and turn the knurled head with your hand for initial positioning.
The Ball Lock Bolt consists of three locking steel balls in the bolt shank that move outward to lock against the bottom chamfer of the table plate, pulling the fixture components securely downward and tightening them in place. Once all the Bolts are positioned, tighten the socket head cap screw top of the Bolts with a light turn of a hex wrench.
Socket Shoulder Screws (Set of 4)
These precision shoulder screws fit into the table holes and can hold and position accessories and other components.
Provided with a nut and washer.