Locating Pin/Stop (4-Pack)
€20.00 excluding VAT
Use the Locating Pins as a stop wherever parts need to be positively located for clamping.
Out of stock
Want to be notified when this item is back in stock?
Locating Pin/Stop
These stops are turned and finished off with a black oxide and oil bath, they are slightly undersized at the bottom to slip fit into 16mm table holes.
Use a pair of pins to quickly set up (locate) an edge on your fixture tables. Use 4 pins together to quickly create a 90 or 45 degree angle. These work great with the BuildPro Inserta Clamps available through our site here as the fastest, simplest way to setup common angles.
| Part No. | Qty | Top Diameter (mm) | Bottom diameter (mm) | Top Height (mm) | Weight (kg) |
| T64205 | 4 | 25 | 16 | 38 | 0,18 |
| Weight | 0.88 kg |
|---|
Related products
Edge Alignment Pins (4-Pack)
€10.20 excluding VATInstall our edge alignment pins on any square to create a large, overhanging edge which can be used to index the square on a different plane. Depending on the square, this allows you to create edges which are 90 degrees (perpendicular), 45 degrees, parallel, and even 60 and 30 degrees from the edge. Overview …Add to cart
Reviews
There are no reviews yet.