Welcome to Fireball Tool Europe!

Magic Package

265.00305.00 excluding VAT

Clear

Magic Package Overview

Build with 3 of the fastest squares, fit up an entire frame at once. Two choices to choose from: All cast iron, all aluminum. For descriptions of the individual squares see: MegaMonsterMagic.

Our package deals have the new thumbscrews included with the tabs which allow tool-less adjustment of the tabs.

KitMega 200mmMonster 200mmMagic Square

Magic Pack 200mm – FE

1x FE
1x FE
1x FE

Magic Pack 200mm – AL

1x AL
1x AL
1x AL

There are so many ways to use this square it seems like Magic. It’s two squares in one- when you purchase one Magic Square you get two individual squares that also link together to form 5 different combo squares. A zinc adjustable handle provides tool-less angle adjustments.

Use it as an ordinary, adjustable angle square that adjusts from 40 to 180 degrees.

Right Angle 90 Degree Square with generous weld accessibility. Total height of 200mm in this configuration.

Tall 300mm square when fully opened and locked into place.

Remove the fasteners to get two individual squares.

Use the large V-groove to hold large round tubing or pipe.

Switch up mating surfaces to position material in offset positions.

Put the squares back together but with the mating surfaces reversed. This allows you to use the square to hold material offset to each other.

Use a second pivot point on the square with the mating surfaces reversed to change the balance of the square, it’ll seem like an entirely different square tool!

Use Shims or 123 blocks

Use Mega Square

Use Minion Square

Included Accessories

Edge Location Tabs

Our revolutionary tabs allow you to align your material up so that you don’t even need a welding table! Don’t spend thousands on a flat table, just use our squares! Tighten the tabs onto the front or back of your square and you can immediately get to work. Sure, there are different jigs out there, but can they line your material perfectly in seconds?

Tool-less Thumbscrews

But it doesn’t stop there. We reinvented the game by introducing our thumbscrews. Say goodbye to your hex keys and Allen screwdrivers and freely adjust the tabs with only your fingers!

Optional Add-ons

Edge Alignment Pins

Install our edge alignment pins on any square to create a large, overhanging edge which can be used to index the square on a different plane. Depending on the square, this allows you to create edges which are 90 degrees (perpendicular), 45 degrees, parallel, and even 60 and 30 degrees from the edge.

  • Use it with our Monster squares to create a speed square for layout.
  • Use it to hang the square off the edge of a table for working vertical or perpendicular to table surface
  • Use it to elevate the squares off the ground or table for extra clearance when you’re fitting and welding entire frames
  • Tip! If trying to create a parallel edge with the mega square for marking, use our shims to get that perfect distance!
  • The Mega Square is designed to quickly set your workpiece to 90 or 45 degrees.
  • Tabs help eliminate twisting and warping in the final workpiece.
  • Clamping is simple with multiple surfaces for quick and rigid attachment.
  • Roomy joint access for welding, gluing, nailing, riveting, etc.
  • The original Monster Square is available in a 300mm or 200mm size with two material choices.
  • The Monster Square is designed to quickly set your work piece to 90 or 45 degrees.
  • Clamping is simple with multiple surfaces for quick and rigid attachment.
  • Use the radius on the tabs to use the Monster Square as a traditional speed square for layout.
  • Use it as an ordinary, adjustable angle square that adjusts from 40 to 180 degrees.
  • Right Angle 90 Degree Square with generous weld accessibility. Total height of 200mm in this configuration.
  • Tall 300mm square when fully opened and locked into place
  • Remove the fasteners to get two individual squares
  • Use the large V-groove to hold large round tubing or pipe
  • Compact configuration for use in tight spaces.
  • 150mm x 100mm x 38mm, the 100mm width is perfect for picket spacing on gates and fences.
  • They are the first square we offer which has a built in 60/30 degree angle.
  • The cutout provides just the right amount of joint access when using it to clamp things at 90 degrees.
WeightN/A
MATERIAL

,

Reviews

There are no reviews yet.

Be the first to review “Magic Package”
Please rate*

Your email address will not be published.

SKU: N/A Category:

You may also like…

  • Edge Alignment Pins (4-Pack)

    10.20 excluding VAT
    Install our edge alignment pins on any square to create a large, overhanging edge which can be used to index the square on a different plane. Depending on the square, this allows you to create edges which are 90 degrees (perpendicular), 45 degrees, parallel, and even 60 and 30 degrees from the edge.   Overview …

    Edge Alignment Pins (4-Pack)Read More

    Add to cart
Select your currency
Euro