Magnetic Shim Kit (28pc)
£148.58 excluding VAT
MAGNETIC SHOP SHIMS
Set of 28 Shop Shims with storage case now in mm sizes.
Each shim is ground on 6 sides with two magnets on the bottom face, there are 7 different heights and 4 pieces of each height in a set. These shims have countless uses around the shop and also in combination with our squares.
The thinner shims have smaller magnets which reduce the amount of force required to remove them.
The shims are ground on all 6 sides to an accuracy of +/- 0.03 mm.
Shims are hardened to HRC 50.
Just remember, to properly measure these you need to use a micrometer mounted on a stand and with the shim wiped clean. A pair of calipers in the hand with a dirty shim will not get an accurate measurement.
Each set includes:
|Height (mm)||Length (mm)||Width (mm)||Pieces in Kit|
Tolerance +/- 0.03 mm
This product contains rear earth magnets which may permanently demagnetize if their temperature exceeds 175°F (80°C). Avoid prolonged exposure to high heat!
Magnetic 25-50-75 Blocks£34.09 – £139.84 excluding VATThe Magnetic 25-50-75 blocks are the larger, beefed up version of our magnetic shop shims. The blocks have 2 powerful rare earth magnets flush mounted on each of 3 different faces while their opposite faces remain without magnets. You will find yourself reaching for these all the time instead of digging through the scrap bin. …Select options
Drill Press Fixture Plate£261.33 excluding VATDrill Press Fixture Plate This plate is 600x450 mm by 16 mm thick. It has 16 mm diameter holes on 50 mm centers, and also M14x2 tapped holes also on 50 mm centers. Lots of possibilities on what you can do with this plate. It’s ground flat and case hardened, also has a black oxide …Add to cart