What is in Each Package
Aluminium (AL) 200mm | Dragon Scale (FE) 200mm | Aluminium (AL) 300mm | Dragon Scale (FE) 300mm |
---|---|---|---|
1x Mega Square 200mm (AL) | 1x Mega Square 200mm (FE) | 1x Mega Square 300mm (AL) | 1x Mega Square 300mm (FE) |
2x Locking C-Clamps 165mm Swivel Pad | 2x Locking C-Clamps 165mm Swivel Pad | 2x Locking C-Clamps 280mm Swivel Pad | 2x Locking C-Clamps 280mm Swivel Pad |
4x Edge Alignment Pins | 4x Edge Alignment Pins | 4x Edge Alignment Pins | 4x Edge Alignment Pins |
4x Edge Locations Tabs and Thumbscrews | 4x Edge Location Tabs and Thumbscrews | 4x Edge Location Tabs and Thumbscrews | 4x Edge Location Tabs and Thumbscrews |
Mega Square
The original Mega Square is available in a 300 or 200 mm size with two material choices: Cast Iron (FE) or Cast Aluminum (AL). All Mega Squares feature a stiff “flange and web” design that is fully machined on all outer edges with tapped holes on the sides for mounting tabs.
- The Mega Square is designed to quickly set your workpiece to 90 or 45 degrees.
- Tabs help eliminate twisting and warping in the final workpiece.
- Clamping is simple with multiple surfaces for quick and rigid attachment.
- Roomy joint access for welding, gluing, nailing, riveting, etc.
Aluminium (AL) | Cast Iron (FE) | Dragon Scale (FE) |
---|---|---|
Pros
Cons
| Pros
Cons
| Fireball’s new Dragon Scale coating provides the corrosion resistance of our previous black oxide finish with the added benefit of enhanced spatter resistance. It’s spatter resistance needs to be seen to believed; it out performs even the best weld spatter sprays without the use of any sprays. |
Locking C-Clamps
These locking pliers from Strong Hand Tools area the perfect companion to our Fireball Squares. Made of forged, heat treated steel with nickel and chrome plating for strength and durability. Ergonomic release lever that won’t pinch.
Tip | OAL (mm) | Throat Depth (mm) | Opening (mm) | Weight (kg) |
---|---|---|---|---|
Swivel | 165 | 46 | 56 | 0.2 |
Swivel | 280 | 83 | 100 | 1.0 |
Learn More About Locking C-Clamps
Edge Alignment Pins
Install our edge alignment pins on any square to create a large, overhanging edge which can be used to index the square on a different plane. Depending on the square, this allows you to create edges which are 90 degrees (perpendicular), 45 degrees, parallel, and even 60 and 30 degrees from the edge.
- Use it with our Monster squares to create a speed square for layout.
- Use it to hang the square off the edge of a table for working vertical or perpendicular to table surface
- Use it to elevate the squares off the ground or table for extra clearance when you’re fitting and welding entire frames
- Tip! If trying to create a parallel edge with the mega square for marking, use our shims to get that perfect distance!
Included Accessories
4 Edge Location Tabs
Our revolutionary tabs allow you to align your material up so that you don’t even need a welding table! Don’t spend thousands on a flat table, just use our squares! Tighten the tabs onto the front or back of your square and you can immediately get to work. Sure, there are different jigs out there, but can they line your material perfectly in seconds?
4 Tool-less Thumbscrews
But it doesn’t stop there. We reinvented the game by introducing our thumbscrews. Say goodbye to your hex keys and Allen screwdrivers and freely adjust the tabs with only your fingers!
Madalin (verified owner) –
My first time buying a Fireball Tool (200mm Dragon scale) and I have to say that it lives up to expectations.
Everything is perfectly worked.
Fireball.eu was just fine and any problem that i had they answered imediately. Thank you for support.
One thing about the 200mm Mega Square that, I wish that it was a little bit more wider.
I got this one because I don’t do big works and i’ve might run into fitting issues with the 300mm one.
All in all, this is a great tool and I am happy that we who live in Europe can get it .